BOOST Rider Scrubber from Clarke

Your #1 Source for Floor Maintenance Equipment

American Products, Inc.
11815 Downs Rd.
Pineville, NC
28134
(704) 588-2400
(800) 443-4119

Email information
requests to:
Avery Lawing at
avery.lawing@
amproinc.info

For years the only way to productively clean and maintain smooth tile or concrete floors has been with a twin-disc automatic scrubber using contra-rotating pads or brushes. These machines operate with low (200-300) RPM and require high pad pressure to achieve an acceptable result.

On rotating disc models, cleaning solution is slung away from the pads and only contained with side skirting that is easily worn or damaged. Another drawback to disc scrubbers is that the pad only cleans in one direction as it passes over the floor surface. With BOOST®, cleaning solution is introduced in front of the rectangular scrubbing pad via Clarke’s patented Pulse Modulated Solution Control.

The orbital action contains the cleaning solution in the pad and carries it for the full length of the pad. Compared to traditional disc scrubbers that sling water away from the pad, BOOST’s efficient use of the cleaning solution results in water savings of 50% to 70%. Using less water during cleaning keeps the operator working productively rather than in the janitor’s closet emptying and refilling the scrubber tanks. This savings in clean water also translates into a 50% to 70% reduction in waste water, which reduces waste water removal costs and is environmentally friendly.

Features Include:
● 50% to 70% less water consumption
● 50% to 70% less chemical consumption
● 25% increase in battery runtime
● 40% increase in pad life
● Half the trips to the deep sink for dumps and fills
● Cleaner floors equal more effective burnishing to extend strip and re-coat cycles
● Reduced noise levels to improve operator safety